Protospiel Online

Mini Rockets Assembly

Rocket pieces are packet with clear tape to reduce the risk of missing parts. Start by removing and discarding the tape.
If desired, find a pair of tweezers to use during assembly. These are not included or required, but they may help you place the glue dots and decals.
Remove the top layer of wax paper to find the glue dot.
If your rocket pieces are thick enough to hold together with friction, you may not need the glue, but it’s available in case some pieces are a bit too thin to hold together on their own.
Divide the glue dot into 4 parts.
Place one of the glue dot quarters at the bottom of the slot on the rocket half with the slot at the top.
Slide the rocket halves together, being careful to keep the glue dot inside the slots.
Press the 2 pieces snugly together until the tips of the fins at the bottom of the rocket are even.
Choose which decal shapes you’d like to use to decorate your rockets. There are enough decals to put one of the same type on every side of the rocket, a unique shape on each side of the rocket, or even a different number of decals on each side to create rocket dice.
In this example, each rocket is marked on all sides with the same decal, and 4 decal patterns are left over.